| 05-03-2024 |
Diseno y Montaje de un sistema de dicing con 3 motores para cortar circuitos electronicos
La propuesta del proyecto busca desarrollar un montaje especializado para el corte preciso de obleas de silicio y circuitos electrónicos. El proyecto incorporará tres motores independientes para asegurar una mayor precisión y versatilidad en los cortes. Se abordarán aspectos clave como la automatización del proceso, la eficiencia en la manipulación de materiales delicados y la integración de tecnologías avanzadas para mejorar la calidad de los dispositivos electrónicos fabricados en sala limpia UC. Este proyecto proporcionará a los estudiantes una valiosa experiencia práctica en la aplicación de técnicas de fabricación de la industria de los semiconductores.
Prerequisitos:
IEE2123
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/2 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 19-12-2023 |
Prototipo de microscopio volumétrico para neurofisiología óptica
Estamos desarrollando una nueva clase de microscopio volumétrico para realizar neurofisiología óptica rápida y localizada de todo el cerebro del pez cebra in vivo. A diferencia de los métodos de imágenes tridimensionales existentes que sacrifican sensibilidad, resolución celular o tasa de muestreo, nuestro enfoque original para el registro volumétrico es la formación de imágenes virtuales multifocales en una sola cámara usando componentes comerciales. En este proyecto implementaremos un prototipo de dispositivo de imagen que utiliza una cavidad óptica y lentes para enfocar un arreglo de imágenes virtuales en una cámara. Las tareas del proyecto incluirán construir un sistema optomecánico, alinear los componentes y realizar pruebas experimentales. Se valora la experiencia en proyectos de hardware, diseño óptico y electrónica, aunque no es necesaria.
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/4 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 20-10-2023 |
Testeo de diseño de dispositivo simulador de deglución pediátrica
La oportunidad de investigación consiste en el testeo de un dispositivo de simulación de deglución infantil con profesionales del área de fonoaudiología, para el levantamiento de medición del desempeño actual y las necesidades de mejora del dispositivo. Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/2 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 15-07-2023 |
Diseño de animaciones
Se propone el desarrollo de animaciones para le curso "Introducción a la Ingeniería Gastronómica". Las animaciones estarán enfocadas a procesos y transformaciones que ocurren en los alimentos, y que permitan entender diferentes fenómenos. Esto incluye entregar de forma animada diferentes contenidos que describan transformaciones a distinto nivel, desde lo microscópico hasto lo macro. Cada estudiante puede utilizar el programa que más le acomode.
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/2 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 14-07-2023 |
Laboratorios especulativos en realidad virtual para el prototipado y testeo de prácticas de management
La investigación se inserta en el proyecto denominado Laboratorios Especulativos; espacios de experimentación de prácticas de management en diversos escenarios futuros. Combina diseño, innovación y management, y se comenzará a explorar la pregunta: ¿Cómo las organizaciones -y sus interlocutores internos y externos- crean prácticas de management que anticipen los desafíos y las oportunidades de futuro, teniendo en cuenta un entorno especialmente incierto y cambiante? Buscamos dos estudiantes con perfiles diferentes: Uno/a trabajará en una revisión de literatura sobre la conexión entre estudios de futuro (future-making, foresight, forecast, world-building, entre otros) y prácticas de management para la construcción de requerimientos de los laboratorios especulativos. Otro/a estudiante revisará prototipos que involucran tecnologías de realidad aumentada e inteligencia artificial y trabajará en su adaptación (y eventual extensión) para la construcción de los laboratorios.
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 1/2 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 13-07-2023 |
Diseño de juegos para fomentar la actividad física de adolescentes con diabetes tipo 1
Se solicitan estudiantes de diseño para desarrollo de diseño de juegos que puedan minimizar las barreras que la condición de diabetes le impone a adolescentes para realizar actividad física
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 8/10 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 07-03-2023 |
SimSpread Web Server
SimSpread is a novel computational method to predict protein–ligand interaction that combines network-based inference with chemical similarity, useful for predicting drug targets, virtual screening, and drug repositioning. https://doi.org/10.3390/ijms23179666 The objective of this project proposal is the development of a web application to enable world-wide access to SimSpread to the international research community. Tasks: • Propose an architecture to receive and run jobs on two different servers. • Implement job queuing to handle multiple incoming jobs. • Implement user interface to select between multiple models and parameters. Candidates should have good programming skills.
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 1/1 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 07-03-2023 |
SimSpread-Ensemble - Development of an ensemble network-based method for drug discovery
SimSpread is a novel computational method to predict protein–ligand interaction that combines network-based inference with chemical similarity, useful for predicting drug targets, virtual screening, and drug repositioning. This project proposal intents to improve several limitations of SimSpread. Hypothesis: The combination of predictions obtained from SimSpread that use different similarity cutoffs into a single score using a machine learning (ML) model will increase predictive performance, eliminate empty predictions and eliminate the need to optimize similarity cutoff parameter, resulting in a more straightfoward and user-friendly model to predict drug-target interactions. Tasks: • Propose an ensemble predictive model. • Implement a hyperparameter optimization. • Compare the predictive performance. Candidates should have good programming skills.
Keywords:
machine learning
bioinformatica
red
red social
aprendizaje maquina
Proteínas
Diseño de fármacos
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 20 créditos y tiene 1/1 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 07-03-2023 |
Desarrollo de una aplicación web para la minería de abstracts biomédicos
Implementar una aplicación web bioinformática basada en minería de textos para extraer información con respecto a la bioactividad de compuestos químicos y de fármacos. La herramienta se aplicará a las publicaciones biomédicas contenidas en el sistema bibliográfico PubMed con el fin de apoyar el reposicionamiento de fármacos. El objetivo es desarrollar una herramienta que es capaz de procesar de manera automatizada un compuesto químico y un blanco farmacéutico para luego clasificar la interacción en novedosa o conocida. El/la postulante debería tener experiencia en programación.
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 1/1 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 26-04-2022 |
Investigación y diseño de Dispositivo de medición de material particulado y CO2
La oportunidad de investigación consiste en realizar un levantamiento de las necesidades de mejora de un dispositivo de medición de material particulado, temperatura y CO2, utilizado para el análisis de dichos parámetros en viviendas. Las mejoras detectadas deben estar orientadas a los usuarios y al desempeño del dispositivo, para obtener como resultado un rediseño de este, considerando su producción escalable.
Prerequisitos:
IDI2015
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/2 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 14-01-2020 |
Capta CFC-Micro
Selección de componentes, fabricación, testing e implementación de mejoras en modelo de dimensionamiento de compuerta telecomandada para entrega de agua entregas finales de canales. A partir de un modelo físico del sistema (compuerta telecomandada y alimentación solar) se hará una selección de componentes específica para un modelo de compuertas para entregas finales el cual debe cumplir restricciones de tamaño y costo. Posteriormente se fabricará e instalará el dispositivo para validar el modelo y proponer mejoras al modelo de dimensionamiento que se usa actualmente.
Keywords:
diseño mecánico
Prerequisitos:
ICM2022
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/3 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 05-03-2024 |
Design and Fabrication of a Three-Motor Dicing System for Precision Cutting of Silicon Wafers and Electronic Circuits
The project proposal seeks to design and implement a dicing system, intended for the precise cutting of silicon parts and electronic circuits. The project will incorporate three independent motors to ensure greater precision and versatility in cuts. Key aspects will be addressed such as process automation, efficiency in the handling of delicate materials and the integration of advanced technologies to improve the quality of electronic devices manufactured in the UC clean room. This project will provide students with valuable hands-on experience in the application of manufacturing techniques from the semiconductor industry.
Prerequisites:
IEE2123
Evaluation method: Nota 1-7, with 2/2 available vacants |
Mentor(s): Open in the plataform |
| 19-12-2023 |
Volumetric Microscope Prototype for Optical Neurophysiology
We are developing a new class of volumetric microscope for fast, localized optical neurophysiology of the entire zebrafish brain in vivo. Unlike existing 3D imaging methods that sacrifice sensitivity, cellular resolution, or frame rate, our novel approach to volumetric recording utilizes multi-focal virtual image formation in a single camera using readily available commercial components. This project will focus on implementing a prototype imaging device that employs an optical cavity and lenses to project an array of virtual images onto a camera. Tasks will include building the optomechanical system, performing component alignment, and conducting experimental testing. Experience in hardware projects, optical design, and electronics is welcome but not essential.
Prerequisites:
None.
Evaluation method: Nota 1-7, with 2/4 available vacants |
Mentor(s): Open in the plataform |
| 07-12-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 30-11-2023 |
Portable device for neonatal length measurement
Anthropometric measurement of newborn length continues to be a challenge in terms of precision and reliability. This is especially critical in hospitals and neonatal critical care units, given the greater difficulty in applying the measurement technique in the conditions in which newborns are found (e.g., in incubators or cardiorespiratory monitoring). These dimensional parameters are the basis for individual clinical decisions and nutritional strategies. The aforementioned measurement difficulties have been recognized and described both locally and internationally, which is why UNICEF (2017) communicated a measurement product profile with the necessary specifications, which is not yet on the market. During this IPRE we will work on literature review and market analysis, as well as collecting information in the field to define requirements and design proposals for the device.
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 20-10-2023 |
Evaluation method: Nota 1-7, with 2/2 available vacants |
Mentor(s): Open in the plataform |
| 27-07-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 15-07-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 2/2 available vacants |
Mentor(s): Open in the plataform |
| 14-07-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 1/2 available vacants |
Mentor(s): Open in the plataform |
| 13-07-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 8/10 available vacants |
Mentor(s): Open in the plataform |
| 11-07-2023 |
Microscope setup for wide-field optical neurophysiology
We are designing an optical neurophysiology microscope to enable measurement and stimulation of neural activity in thousands of neurons in a wide field of view spanning multiple regions of the murine brain. In this project we will plan and build the necessary hardware to integrate essential components of a custom microscope, including a camera, fluorescence filters, an array of micromirrors, light sources, among others. Tasks in this project will include designing mechanical installations, integrating mechanical, electronic and optical systems, and component alignment. Experience in mechanical design, 3D printing, optical design, hardware and electronics projects is welcome but not required
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 11-07-2023 |
Construction of volumetric microscope prototype
We are developing a new class of volumetric microscope to enable fast, localized optical neurophysiology of the whole live zebrafish brain. Unlike existing three-dimensional imaging that compromises sensitivity, cell resolution, or framerate, our original approach to volumetric recording is multi-focal virtual image formation in a single camera using commercial components. In this project we will implement a prototype imaging device that uses an optical cavity to generate virtual arrays of images in a camera. Tasks in the project will include to build an optomechanical system, perform basic alignment, and experimental testing. Experience in hardware projects, optical design, and electronics is welcome but not required.
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 07-03-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 1/1 available vacants |
Mentor(s): Open in the plataform |
| 07-03-2023 |
Keywords:
machine learning
bioinformatica
red
red social
aprendizaje maquina
Proteínas
Diseño de fármacos
Prerequisites:
None.
Evaluation method: Nota 1-7, with 1/1 available vacants |
Mentor(s): Open in the plataform |
| 07-03-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 1/1 available vacants |
Mentor(s): Open in the plataform |
| 07-03-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 07-07-2022 |
Microscope design for wide-field optical neurophysiology
We are designing an optical neurophysiology microscope to enable measurement and stimulation of neural activity in thousands of neurons in a wide field of view spanning multiple regions of the murine brain. In this project we will plan and build the necessary hardware to integrate essential components of a custom microscope, including a camera, fluorescence filters, an array of micromirrors, light sources, among others. Tasks in this project will include designing mechanical installations, integrating mechanical, electronic and optical systems, and component alignment. Experience in mechanical design, 3D printing, optical design, hardware and electronics projects is welcome but not required
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 06-07-2022 |
Construction of volumetric microscope prototype
We are developing a new class of volumetric microscope to enable fast, localized optical neurophysiology of the whole live zebrafish brain. Unlike existing three-dimensional imaging that compromises sensitivity, cell resolution, or framerate, our original approach to volumetric recording is multi-focal virtual image formation in a single camera using commercial components. In this project we will implement a prototype imaging device that uses an optical cavity to generate virtual arrays of images in a camera. Tasks in the project will include to build an optomechanical system, perform basic alignment, and experimental testing. Experience in hardware projects, optical design, and electronics is welcome but not required.
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 26-04-2022 |
Prerequisites:
IDI2015
Evaluation method: Nota 1-7, with 2/2 available vacants |
Mentor(s): Open in the plataform |
| 01-08-2021 |
Methodological tools for responsible innovation
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 02-07-2021 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 29-03-2021 |
Keywords:
Emprendimiento Social
diseño
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 17-07-2020 |
Circular Economies in Local Communities
This research project proposes an exploration of the problems that local communities face in relation to waste management, recycling, use of materials and similars, as part of their community life. The objective of the project is to discover which are the central elements of these problems, characterize them and identify areas of opportunity to make a possible intervention using engineering, design and innovation as tools for social change. The project offers one vacancy, preferably for a student from the Major IDI interested in research, in issues related to sustainable design and the circular economy, and motivated to address local community problems. Those interested can communicate to the mail rhernandep@ing.puc.cl
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 19-01-2020 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 14-01-2020 |
Keywords:
diseño mecánico
Prerequisites:
ICM2022
Evaluation method: Nota 1-7, with 2/3 available vacants |
Mentor(s): Open in the plataform |
| 06-12-2018 |
Design of multimedia contents for public outreach of the Liquiñe Geothermal System, Los Ríos Region
This course aims to generate and disseminate the results obtained in the framework of project FONDECYT Nº 1180167 and the Center of Excellence for Geothermal energy of The Andes (CEGA). Students will produce multimedia content for mass dissemination in public spaces that account for the importance of the System of Fault of the Liquiñe-Ofqui and Faults that Cross The Andes in the generation and evolution of fields geothermal assets in the Region of The Rivers. This course is an investigation of a multidisciplinary nature that involves the understanding and synthesis of information obtained in investigations by the geological and social. It also seeks to have an impact on the diffusion on an academic level and in the education into the communities of the region.
Keywords:
geotermia
diseño informacion
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 05-03-2018 |
Development of Autonomous Robotic Vehicles.
Development of smart features in autonomous robotic vehicles autonomous applied to various industries, such as agricultural and manufacturing. Includes aspects such as autonomous navigation, manipulation of delicate objects, traction efficiency in uneven terrain, work strategies, logging of operation data, etc
Prerequisites:
ICM2022
Evaluation method: Nota 1-7, with 0/4 available vacants |
Mentor(s): Open in the plataform |