| 05-03-2024 |
Diseno y Montaje de un sistema de dicing con 3 motores para cortar circuitos electronicos
La propuesta del proyecto busca desarrollar un montaje especializado para el corte preciso de obleas de silicio y circuitos electrónicos. El proyecto incorporará tres motores independientes para asegurar una mayor precisión y versatilidad en los cortes. Se abordarán aspectos clave como la automatización del proceso, la eficiencia en la manipulación de materiales delicados y la integración de tecnologías avanzadas para mejorar la calidad de los dispositivos electrónicos fabricados en sala limpia UC. Este proyecto proporcionará a los estudiantes una valiosa experiencia práctica en la aplicación de técnicas de fabricación de la industria de los semiconductores.
Prerequisitos:
IEE2123
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/2 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 07-03-2023 |
Desarrollo de una aplicación web para la minería de abstracts biomédicos
Implementar una aplicación web bioinformática basada en minería de textos para extraer información con respecto a la bioactividad de compuestos químicos y de fármacos. La herramienta se aplicará a las publicaciones biomédicas contenidas en el sistema bibliográfico PubMed con el fin de apoyar el reposicionamiento de fármacos. El objetivo es desarrollar una herramienta que es capaz de procesar de manera automatizada un compuesto químico y un blanco farmacéutico para luego clasificar la interacción en novedosa o conocida. El/la postulante debería tener experiencia en programación.
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 1/1 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 22-12-2020 |
Diseño e implementación de software de lógica difusa para gestualidad musical
Diseño y desarrollo de una herramienta de lógica difusa para aplicaciones musicales en tablets y computadores de escritorio en C/C++ (Juce), a partir del Fuzzy Logic Control Toolkit (FLCTK).
Prerequisitos:
no tiene.
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/2 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 14-07-2020 |
Programación de itinerarios cargueros considerando restricciones geométricas de los pedidos
Al planificar los itinerarios de aviones cargueros, las aerolíneas por lo general consideran el peso de la carga y el volumen informado por el cliente. Sin embargo, no se toman en cuenta la geometría específica de cada pedido. Esto puede provocar que carga originalmente asignada a un vuelo, no sea factible embarcarla debido a sus dimensiones. Este problema fue abordado recientemente por un alumno de magíster quien formuló un modelo de programación matemática que busca diseñar el itinerario de aviones cargueros que maximice las utilidades asociadas al transporte de carga, respetando las restricciones geométricas de los pedidos a transportar. Resolver directamente este problema es computacionalmente muy demandante en tiempo. El objetivo de esta investigación es desarrollar un algoritmo de solución para el problema planteado anteriormente que pueda ser resuelto en un tiempo razonable. Además, el estudiante deberá diseñar experimentos para probar la calidad del método a desarrollar.
Prerequisitos:
IIC2115
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 1/1 vacantes disponibles |
Mentor(es): Ver en la plataforma |
| 05-03-2024 |
Design and Fabrication of a Three-Motor Dicing System for Precision Cutting of Silicon Wafers and Electronic Circuits
The project proposal seeks to design and implement a dicing system, intended for the precise cutting of silicon parts and electronic circuits. The project will incorporate three independent motors to ensure greater precision and versatility in cuts. Key aspects will be addressed such as process automation, efficiency in the handling of delicate materials and the integration of advanced technologies to improve the quality of electronic devices manufactured in the UC clean room. This project will provide students with valuable hands-on experience in the application of manufacturing techniques from the semiconductor industry.
Prerequisites:
IEE2123
Evaluation method: Nota 1-7, with 2/2 available vacants |
Mentor(s): Open in the plataform |
| 20-06-2023 |
Designing a Simulation Environment for Differential Drive Robotic Structures
Currently, academic institutions have robotic platforms that enable the practical application of theoretical engineering concepts in real scenarios and problems. However, limitations have been identified regarding the lack of a simulator that allows students to familiarize themselves with the platform outside the laboratory environment. In this context, the proposal is to design a simulation environment that accurately reproduces the characteristics of existing robotic platforms. Specifically, the geometry of the platforms, electronic components, and mechanical aspects should be considered to achieve an accurate simulation of both the platforms and the operating environment. The simulation environment should be intuitive for the user and have proper documentation to facilitate future improvements or modifications.
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 05-06-2023 |
Workers' positioning and task identification system for offsite construction industries
Offsite construction industries have become appealing because of their time efficiencies, safety, and reduced waste. Although this new trend promotes the previously mentioned advantages, they still face some significant challenges, such as tracking and monitoring the current state of the component being built. In order to address this challenge, the current undergraduate research project proposes developing and implementing a worker's positioning and activity identification system. The information to accomplish these aims is retrieved from four load cells (LC) and four inertial measurement units (IMUs). The sensor data should be acquired and pre-processed by a microcontroller, sending that information to a computer. The computer uses pre-processed information to identify the workers' positions and their current activities.
Keywords:
electrónica
instrumentación
Construcción
programación
automatización
procesamiento señal
microcontroladores
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 07-03-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 1/1 available vacants |
Mentor(s): Open in the plataform |
| 07-03-2023 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 20-12-2022 |
Keywords:
programación entera
TSP
Prerequisites:
ICS1113
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 06-07-2022 |
All-optical electrophysiology signal extraction using deep learning
All-optical electrophysiology is revolutionizing neurobiology by enabling stimulation and measurement of large-scale neuronal activity non-invasively in the living brain of model animals. In our Laboratory we develop computational imaging techniques and apply them to optical electrophysiology measurements with high-speed optical section. In this project we will develop artificial intelligence methods to optimally identify neural signals from imperfect, mixed, and moving measurements. We seek to implement an algorithm that replicates the function of the human brain to identify these signals, which exceeds existing numerical algorithms. Expertise in programming, deep learning, and neurophysiology is welcome but not necessary.
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 14-12-2021 |
Modeling of the atmospheric signal and other contaminants in cosmological data
The measurements of the cosmic microwave background radiation done from the ground suffer from atmospheric contamination, as well as other contaminants. This justifies the development of new models to identify and treat these contaminants, aiming to produce clean maps of the background signal. Our group is an active collaborator of several CMB experiments installed in Chile, contributing among other things to the analysis and reduction of raw data, including the modeling of contamination and systematic effects contained in the data. In this IPRE the student will develop computational and mathematical methods to model and extract the atmospheric signal from real raw data obtained by the ACT telescope. His/her results will be potentially implemented in the real pipeline for the production of better CMB maps.
Keywords:
telescopios
microondas
análisis de datos
computación
programación
Astronomia
radioastronomía
Atmosfera
Prerequisites:
IIC1222
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 19-07-2021 |
Development of an open hardware based wide field computational microscope for pollen recognition
Development of a working low-cost computational wide-field microscope for honey-pollen imaging (remotely at home) and analysis of generated data with MatLab or Python. A 3D printed prototype already exsists based on the publication 'Low-cost, sub-micron resolution, wide-field computational microscopy using opensource hardware’. Students should already have basic experience with prototyping and coding.
Keywords:
programación
automatización
microscopia
IMPRESION 3D
interdisciplinaria
libre hardware
polen
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
| 22-12-2020 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 2/2 available vacants |
Mentor(s): Open in the plataform |
| 20-07-2020 |
Optimization of production planning with learning problems, cutting stock and pricing
It will examine the effect of learning curves on problems that are based on cutting-stock and pricing. To do this is to use programming models non-linear and linear-integer, they study the effect of learning curves on the productive choices. You manage the optimization and basic computer skills.
Prerequisites:
ICS1113
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
| 14-07-2020 |
Prerequisites:
IIC2115
Evaluation method: Nota 1-7, with 1/1 available vacants |
Mentor(s): Open in the plataform |