09-12-2022 |
Estudio de desgaste por flujo abrasivo mediante velocimetría acústica
Estamos desarrollando un sistema de monitoreo de desagaste por flujo abrasivo basado en velocimetría acustica. Actividades IPRE (a elegir): 1) Analisis de imagenes acusticas (PIV, particle tracking), 2) Calibración del sistema de adquisición de datos, 3) Caracterización de muestras desgastadas (perfilometría), 4) Reconstrucción del campo de flujo 3D. *Dedicación de 10 cr/sem. o 5 cr /2 sem. *Trabajo en equipo. *Posibilidad de continuar como trabajo de titulo y/o tesis de magister.
Prerequisitos:
ICH1104
Tiene un método de evaluación Nota 1-7, con 10 créditos y tiene 2/5 vacantes disponibles |
Mentor(es): Ver en la plataforma |
03-07-2023 |
Keywords:
contaminantes
microalgas
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
05-04-2023 |
Treatment of sludge from the pulp and cellulose industry via anaerobic digestion
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
30-12-2022 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
09-12-2022 |
Prerequisites:
ICH1104
Evaluation method: Nota 1-7, with 2/5 available vacants |
Mentor(s): Open in the plataform |
09-12-2022 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
30-11-2022 |
Additive manufacturing of 2D material-reinforced polymer cages for rolling bearings
One of the major challenges for mechanical systems, such as rolling bearings, is associated with friction and wear when conventional lubricants cannot or shall not be employed. Despite substantial advances in the solid lubrication ability of 2D materials due to their weakly bonded multi-layer structure and self-lubricating characteristics, the combination with additive manufacturing of bearing components remains unexplored. Undoubtedly, combining 3D printing techniques, such as fused deposition modeling (FDM) or selective laser melting (SLM), with 2D material-reinforced multifunctional composite structures has the potential to offer new opportunities for developing novel rolling bearing cage designs. The objective therefore is to develop and investigate the fabrication of polyamide matrix composites reinforced by molybdenum disulfide (MoS2) and MXene 2D nanomaterials by means of additive manufacturing towards tailor-made, lightweight, and high durability cages.
Prerequisites:
None.
Evaluation method: Nota 1-7, with -1/1 available vacants |
Mentor(s): Open in the plataform |
12-12-2021 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |
23-03-2021 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
05-01-2021 |
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/1 available vacants |
Mentor(s): Open in the plataform |
23-11-2018 |
Decarbonization of the elctricity generation in Chile
The commitments taken by Chile in the Paris Convention of 2015 will imply a significant reduction of greenhouse gas emissions, in particular of carbon emissions. The research consists in determining the carbon emissions reductions in the generation sector, the costs of these reductions and the equivalent price of carbon. The study should identify the different cost-efficient mechanisms available to the country in order to reduce emissions, in particular, the availability of renewable resources, and imports of natural gas from Argentina. The study will use an existing programing of a computational model of the Chilean electricity system, and that will be improved for the purposes of the study.
Prerequisites:
None.
Evaluation method: Nota 1-7, with 0/2 available vacants |
Mentor(s): Open in the plataform |